Onean Carver X, Руководство пользователя

Страница: 18 / 26

CARVER USER’S MANUAL
18
05
S
afety
G
uidelineS
5.1 t
erMS oF
u
Se
• The Carver board is suitable for fresh ans salt water use . Ideal conditions
are with no wind and flat water.
• Be aware of local regulations before using and the areas where this
kind of equipment is eligible for use.
• Taking into account that the jet sucks water through the intake it is
important to look for water is free of floating elements at which to
practice this sport. Mentioned floating elements could cause damage to
the rotating elements inside the waterjet.
• The Carver Board has not been designed to be used at wave breaking
areas. Please look for an area of calm waters at which to entry the water.
• Taking into account the high speeds and maneuverability of the board, it
important to use the Carver at large open spaces free of obstacles.
• Be aware of the tides. With the sea level changes, new obstacles may
arise depending on the tide.
• Avoid using this product in the vicinity of other people, vessels or objects
that may compromise the user’s or board’s security.
• Avoid crowded beaches and always respect the navigation channels.
• In case of entering the water throught the beach, make use of the marked
areas that allow the entry and exit of watercrafts.
• It is advisable not to overturn/flip the board in the water.
• Do not grab or lift the board by the discharge connectors.
• Do not remove the goretex vent in the back of the board.
5.2. b
eFore getting into the water
• Make sure the leash and the magnetic security key (kill switch) are in good
condition.
• Make sure the remote works properly before heading to the water.
• Make sure to assemble your equipment over grass or sand in order not
to damage it. Any damage caused by manipulating your equipment over
a hard and abrasive surface will not be covered by the warranty.