Onean Carver X, Руководство пользователя

Страница: 14 / 26

CARVER USER’S MANUAL
14
04
U
se and
C
onfigUration of the
e
qUipment
on the controller beings to blink. At
this moment, the LED bar will begin to
progressively light up. Each position
represents a different function.
a
) S
hynchronization
. 1
St Led
b
Linking
Once the first LED begins to blink, you
must press on the drop again to access the submenu.
In this submenu, the controller will begin to search for a board for a few
seconds and the sync LED will begin to blink.
As the sync LED is blinking the battery must be inserted to complete
the synchronization (see 4.1.2.).
Once the board is synched, both LEDs will blink at a higher pace
indicating that the process has been successfully completed.
b
) M
axiMuM
P
ower
. 2
LedS
b
Linking
Once that the first two LEDs are
flashing you must press on the
drop to access this submenu.
The power bar will progressively light up. Press on the drop to set
the desired value according to the following description.
c
) c
ontroLLer SenSitivity
. 3
LedS
b
Linking
Once the first three LEDs are flashing you must press on the drop to
access the submenu.
The power bar will progressively light up. Press on the drop to set
the desired value according to the following description.
• 1 LED: Staggered 1.
• On this profile we have discretized the power levels of
the jet in 5 different ranges of pressure on the drop. It
allows us to control and hold the pressure on each range.
SYNC BATTERY
LED Blinking
2
SYNC BATTERY
LEDs Power [W] Display
1 LEDs 1.500
2 LEDs 2.300
3 LEDs 5.100
4 LEDs 7.400
Factory Settings
5 LEDs 10.000
Power %
Low
0
20
40
60
80
100
Medium High
Staggered 1