7. Adjustment Instruction
7.1. outline of the function of the system
6
7
Enter the menu by pressing the SET button of the control panel. Select the
P00 to adjust the rotating direction of the motor. Press the INC button, the
rotating direction should be the same with the unlocking position, otherwise
transfer the connection of the motor after exiting the menu, the turnstile will
self check the rotating direction of the motor. If the rotating direction is not
right, there will be alarm every second. At this moment, cut the electricity,
modify the connection and adjust it again. When the system begins to self-
check the rotating direction of the motor, the two transit switches are not
effective, otherwise there will be alarm every 0.5 second. When the switch is
7.3. Checking with first-time electricity
Check the system carefully before powering the turnstile. Make sure no
part of the turnstile be jammed.
7.2. Checking the system
2) Test boom-lowering function: if electricity is cut off, the boom will be
down automatically. If the power is on, the boom will rotate for several round
and then the boom will be at the level position and be locked.
1) Adjust the running function of the turnstile: when the card is read in the
left, the left LED indication will turn green. When the boom is moved by the
outward strength, the calculator will count the flow rate. Then the LED
direction indication will turn red. Only one person can pass the turnstile
passage for one time. If the person does not transit in the specific time, the
system will restore automatically. It works the same way in the right as the
left.
1) Memory of reading card and transit function: when one person read the
card and another person also read card immediately after the first person, the
system will automatically memory the card-reading for this time. After the
first person transit and lock and unlock for the second person to transit.
7.6. adjustment of the system function
When the turnstile is unlocked, the green direction indication light will
be on. The red indication light is off, then the transit-indication light will
flash for a time. This means that the turnstile is unlocked. When the turnstile
is locked, the red direction indication is on, then the transit-indication light
will be off. This means that the turnstile is locked. Demand: the unlocking
should be even for left and right.
Attention: when the turnstile is unlocked, the transit-indication light
can not be on at the same time as the transit -permitted indication light ,
otherwise this adjustment should be repeated.
7.5. Adjust the photo electricity switch for the left and right transit.
2) Auto open when power off, and auto close when power on.
In order to facilitate the user, there are multiple working modes for the
user to chose according to the actual situation of usage.
1) Bi-directional card reading and staff limiting
2) Left can read the card , while right can be forbidden to pass
3) Right can read the card , while left can be forbidden to pass
4) Bi-directional forbidden pass
6.4 The working mode of the turnstile
Warning: Do finish the above adjustment when the power is on for the
first time, otherwise the machine will be jammed and destroy the
machine!
( refer to the instruction of the setting of the menu )
7.4. Setting of the menu
6.2. The basic working theory of the turnstile
After the card is read, the card reader will send a signal to the control
panel for permitting passing for the effective card. The control panel will
make the motor run. Then the boom will rotate for an angel and unlock the
system with the sound “ Di ” . Then the people can transit. After the people
have passed it and the boom has rotated for 120 degree and the calculator
will count the flow rate. For the IC or ID card reader installed in the turnstile,
the system will judge the card, if the card is effective, it will send signal to
the control panel for unlocking or locking the turnstile.
The turnstile is composed of stainless steel housing, machine core,
control panel, card reader and display equipment and so on. The stainless
steel housing is made by separation and combination structure, which make
it easy for package and shipment.( Refer to our products for details). The
card reader is made and offered by us. The user can also install the card
reader according to his own needs. There are places form installing the card
reader and the display equipment. If the user want to choose the card reader
themselves, please tell us the specification and position of the card readers.
The turnstile can be used as a unit and as one intelligent passage. It can
also be used together, composing several passages. Meanwhile, it can also
connect to the computer. So working feedback can be sent back to the
administer.This feedback can form a report so that the administer can control
the turnstiles well.
6.1. Structure of the turnstile
6
.
3
.
The
composition
of
the
turnstile
