background image

Page 9

For technical questions, please call 1-800-444-3353.

SKU 68825

Operating Instructions

  Read the ENTIRE IMPORTANT SAFETy 

INFORMATION section at the beginning 

of this manual including all text 

under subheadings therein before 

set up or use of this product.

WARNING:

 Do not use the Snow Thrower on rocky or 

gravel surfaces. Such materials can be drawn up into 

the machine, damage the machine and/or cause injury 

to bystanders or property damage when ejected.

Figure 10

To prevent the extension cord from disconnecting during 

use, tie the extension cord into a loose knot on the top 

right side of Middle Handle before connecting the plug.

Powering On And Off

1. 

Brake Handle

Starter 

Button

Safety Key

Safety Key

slot

Installed 

Safety Key

Figure 11 

Release the Brake Handle and insert the 

Safety Key as far as it will go into its slot.

2.  Press and hold the Starter Button.

3. 

Figure 12 

Brake 

Handle

Handle 

Bar

Squeeze the Brake Handle and Handle Bar firmly 

together to start the machine. 

The machine 

can only be started by pressing the Starter 

Button first and then squeezing the Brake 

Handle and Handle Bar together. Reverse 

operation cannot start the machine. 

4.  To power off, release your grip on the Brake Handle.

Changing Snow Direction

TO PREVENT SERIOUS INJURy FROM 

ACCIDENTAL OPERATION: 

Never direct the snow Discharge Chute at 

bystanders, vehicles or nearby windows. The 

discharged snow and any foreign objects can 

cause serious damage and personal injury. 

1. 

Figure 13 

Chute 

Crank

Discharge 

Chute

The Discharge Chute can be adjusted 180 degrees 

by rotating the Chute Crank. Rotate the Chute Crank 

clockwise to move the Discharge Chute to the left; 

counterclockwise to move the Chute to the right.

Содержание winter 68825

















Отзывы: