background image

Page 5

For technical questions, please call 1-800-444-3353.

SKU 94573 

        

the tool if the power cord or plug 

is damaged.  If damaged, have it 

repaired by a service facility 

before use.  If the plug will not fit 

the outlet, have a proper outlet 

installed by a qualified 

electrician.

double Insulated Tools: Tools with 

Two Prong Plugs

Outlets for 2-Prong Plug

Tools marked “Double Insulated” do 

1. 

not require grounding.  They have a 

special double insulation system which 

satisfies OSHA requirements and 

complies with the applicable standards 

of Underwriters Laboratories, Inc., the 

Canadian Standard Association, and the 

National Electrical Code.  

(See Outlets 

for 2-Prong Plug.)

Double insulated tools may be used in 

2. 

either of the 120 volt outlets shown in the 

preceding illustration.

  (See Outlets for 

2-Prong Plug.)

Extension Cords

note:

  Extension cords must not be used with 

this item’s charger.

Symbology

Double Insulated

Canadian Standards Association

Underwriters Laboratories, Inc.

V~

Volts Alternating Current

A

Amperes

n0 xxxx/min.

No Load Revolutions per Minute 

(RPM)

Содержание BACKPACK SPRAYER 94573












Отзывы: