background image

Page 4

For technical questions, please call 1-800-444-3353.

SKU 94573 

        

Always follow all chemical label 

6. 

precautions and local EPA regulations 

when using liquid chemicals.  

Do 

not touch harmful chemicals.  After 

use, clean the Sprayer thoroughly with 

agents recommended by the chemical 

manufacturer.

never point the nozzle of the Spray 

7. 

Gun Assembly at yourself, other 

people, pets and animals, or property.
A note on Chemicals disposal:  

8. 

Never 

attempt to burn unused fertilizers, 

herbicides, pesticides, or any other types 

of chemicals.  Make sure to check with 

your local solid waste authorities for 

proper disposal procedures.

Always make sure children and 

9. 

animals do not have access to 

chemically treated areas.
dry running will cause damage to 

10. 

the inner seals.  

Make sure the water 

or liquid chemical supply used for the 

Sprayer is not dirty or sandy.

do not pull or carry the Sprayer by its 

11. 

Spray Gun Assembly.  

Use the Handle 

on the Sprayer to move the tool from one 

location to another. 

The work area should have adequate 

12. 

drainage to reduce the possibility of a 

fall due to slippery surfaces.
This product is designed for outdoor 

13. 

use only.
Keep the Cap and Spray Gun 

14. 

Assembly of the Sprayer connected 

to the tool while the system is 

pressurized.  

Prior to refilling or 

emptying the Tank, squeeze the 

Trigger on the Spray Gun Assembly to 

completely depressurize the system.

Prior to starting the Sprayer in cold 

15. 

weather, check all of the parts of 

the tool to make sure ice has not 

formed.  

Do not store the Sprayer 

where the temperature will fall below 32° 

Fahrenheit.

do not keep water or any liquid 

16. 

chemicals in the Sprayer after use.
Make sure to clean the Filter of the 

17. 

Sprayer before each use.
never leave the Sprayer unattended.

18. 

  

When finished using the Sprayer, empty 

the unit.  Thoroughly clean the unit and 

store it in a clean, dry, safe location out 

of reach of children.
The warnings and cautions discussed 

19. 

in this manual cannot cover all possible 

conditions and situations that may occur.  

It must be understood by the operator 

that common sense and caution are 

factors which cannot be built into this 

product, but must be supplied by the 

operator.
People with pacemakers should consult 

20. 

their physician(s) before using this 

product.  Electromagnetic fields in close 

proximity to a heart pacemaker could 

cause interference to or failure of the 

pacemaker.

SAVE ThESE InSTRuCTIOnS

GROundInG

 

TO PREVEnT 

ELECTRIC ShOCK 

And dEATh FROM InCORRECT 

GROundInG WIRE 

COnnECTIOn: 

Check with a qualified electrician 

if you are in doubt as to whether 

the outlet is properly grounded.  

do not modify the power cord 

plug provided with the tool.  

never remove the grounding 

prong from the plug.  do not use 

Содержание BACKPACK SPRAYER 94573












Отзывы: