SKU 65026
For technical questions, please call 1-800-444-3353.
Page 7
OpERaTIng InSTRuCTIOnS
Read the EnTIRE IMpORTanT
SaFETy InFORMaTIOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Tool Set up
TO pREVEnT
SERIOuS InjuRy
FROM aCCIDEnTaL
OpERaTIOn:
Make sure Trigger is in the
“OFF” position and unplug
and remove Battery pack
before performing any
inspection, maintenance, or
cleaning procedures.
Designate a work area that is clean
1.
and well-lit. The work area must not
allow access by children or pets to
prevent injury and distraction.
There must not be hazardous ob-
2.
jects, such as utility lines or foreign
objects, nearby that will present a
hazard while working.
Before use, carefully remove the
3.
Blade Cover (7) from the Blade (8).
general Operating Instructions
To activate Trimmer, depress the
1.
Lock Button (31). Then press the
Trigger (28).
For effective cutting, swing Trimmer
2.
gently from side to side while walking
forward.
3.
Keep hands and feet away
from cutting area.
4.
Keep hands away from
blade.
WaRnIng!
5.
Make sure cutting line is
in front of you and that the Guard (9)
is in place.
Make sure the Trimmer stays at a
6.
30° angle to achieve best trimming
results.
When cutting longer grass, take sev-
7.
eral small cuts.
please note:
8.
The Trimmer is
equipped with an auto-feed mecha-
nism for the Line Spool (2) and Nylon
Line (2a).
To activate the auto-feed, lightly
9.
bump the line feed button at the
bottom of the Line Spool on a firm
surface. This will feed-out the Ny-
lon Line until the Blade cuts the line,
adjusting it to the correct length. See
Figure C
, below.
To switch off Trimmer, release the
10.
Trigger and press the Lock Button to
prevent accidental starting.
Replacing Line Spool
Before replacing Line Spool (2),
1.
remove Battery Pack from Trimmer
and make sure the Blade Cover is in
place.
Figure C
Blade (8)
Auto-Feed
Button
Nylon Line
(2a)
