One for All URC10820N, Руководство пользователя

Страница: 13 / 34

13
To Re-Assign Device Perform Sequence
AUX1 as 2nd CBL key: SET - 9 - 9 - 2 - CBL - AUX1
AUX1 as 2nd SAT key: SET - 9 - 9 - 2 - SAT - AUX1
AUX1
as 2nd
CD
key:
SET
-
9
-
9
-
2
-
CD
-
AUX1
AUX1 as 2nd PVR key: SET - 9 - 9 - 2 - PVR - AUX1
AUX1
as 2nd
AUD
key:
SET
-
9
-
9
-
2
-
AUD
-
AUX1
AUX1 as 2nd AUX2 key: SET - 9 - 9 - 2 - AUX2 - AUX1
You can also re-assign another unused device key by substituting
an open key for the
AUX1 key in the above chart and performing
the sequence. For example, to re-assign an unused CBL key as a 2nd
CD key, perform SET - 9 - 9 - 2 - CD CBL . When a re-assignment is
done, the LED (red light) will blink twice to confirm your choice. At
that time, you will need to program the remote control for the new
device (see “Setting Up Your Components”).
Using Keymover
This remote includes a Keymover feature that allows you to map (or
copy) keys from one mode (i.e., source mode) to another mode (i.e.,
destination mode).
NOTE:
The following keys cannot be used as a source or
destination:
TV
,
CBL
,
SAT
,
VCR
,
DVD
,
CD
,
PVR
,
AUD
,
AUX1
,
AUX2 , FAV , and SET .
Programming Keymover
For example, if your VCR does not have volume control, you can
map those keys (i.e.,
VOL + , VOL - , and MUTE ) from the TV mode
to the VCR mode as follows:
1. Press and hold
SET
until the LED (red light) blinks twice, then
release SET .
2. Enter
9 9 4
. The LED will blink twice.
3. For the source mode, press
TV
once.
4. For the source key, press VOL + once.
5. For the destination mode, press VCR once.
6. For the destination key, press VOL + once.
7. The LED will blink twice, indicating the keymoved sequence is
correct.
8. Repeat steps 1 through 7 twice more to map remaining volume
control keys, substituting VOL - and MUTE as source and
destination keys in steps 4 and 6.
Upon completion of the above procedure, you can now use this
remote to control the TV’s volume and
MUTE in the VCR mode, as
well as in the TV mode.
Restoring Keymoved Keys To Default Settings
Restoring a Single Keymoved Key
1. Press a device key that has a keymoved key.
2. Press and hold
SET
until the LED (red light) blinks twice, then
release SET .
3. Enter 9 9 4 . The LED will blink twice.
4. Press the destination key twice (where the keymoved key is
stored). The LED will blink twice.