10
WWW.ONEFORALL.COM
Example: How to learn (copy) the “I/II (mono/stereo)“ function from your
original remote onto the “red key” on your ONE FOR ALL remote control.
2
Press
9 7 5
.
Press and hold
magic
for 3 seconds until a mode indicator (Blue LED) stays lit.
--> The
blue LED will blink
twice.
3 sec.
Select the
corresponding
device e.g.
TV
< select >
x2
3
x2
4
2 - 5 cm
First; Press the ”
red
” key.
The TV LED will flash rapidly.
ATTENTION: Place both remote controls on a flat
surface. Make sure that the ends you normally
point at your device are facing each other.
Align both remotes also in height
then;
Press the “
I/II
(mono/streo)” key.
The blue LED will blink twice to
confirm successful learning.
• If you want to copy other functions within the same mode, simply repeat step 4
pressing the next key you want to copy by learning.
• You can learn approximately 100 functions.
Press and hold the
magic
key for 3 sec. --> The
blue LED will blink
twice and
switch off.
1
3 sec.
5
The Learning Feature
(How to copy functions from your original working remote onto the ONE FOR ALL 4
)
708981_URC-7140_21t_RDN-2300512:7950 Manual_gedrukt 30-05-12 10:39 Pagina 10
