8
2.
Enter
9
-
9
-
2
. The LED will blink twice.
3.
Press
TV
once, then press
VCR/DVD
once.
4. The
VCR/DVD
key is now ready to be programmed for your second
TV.
(see
Setting Up Your Components
).
To re-assign other device keys, repeat steps 1 through 4 by substituting
the key sequence from the below chart for the most popular compo-
nents:
To Re-Assign Key
Sequence Perform
VCR/DVD
as2ndTVkey:
SET
-
9
-
9
-
2
-
TV
-
VCR/DVD
VCR/DVD
as2ndCBLkey:
SET
-
9
-
9
-
2
-
CBL/SAT
-
VCR/DVD
VCR/DVD
as2ndSATkey:
SET
-
9
-
9
-
2
-
CBL/SAT
-
VCR/DVD
VCR/DVD
backto
VCR/DVD
:
SET
-
9
-
9
-
2
-
VCR/DVD
-
VCR/DVD
When a re-assignment is done, the LED will blink twice to confirm your
choice.At that time, you will need to program the remote control for the
new device (see
Setting Up Your Components
).
CHANGING VOLUME LOCK
The One For All 3 Devices is set to control the volume of your TV in the
TV,VCR, CBL/SAT, and DVD modes. If you want the volume to be con-
trolled by a mode other than TV (e.g., CBL/SAT), change the Volume
Lock as follows:
To Change Volume Lock To Another Mode:
1.
On the remote control, press and hold
SET
until the LED
blinks twice, then release
SET
.
2.
Enter
9
-
9
-
3
and then press any mode key once (except
TV
). The LED will blink twice.
3.
Now, whenever you press
VOL+
, or
VOL–
, volume will be con-
trolled by your
mode choice.
Unlocking Volume Control:
NOTE: Perform these instructions when you want independent volume control for
each programmed device (e.g., TV volume control in TV mode, CBL/SAT volume
control in CBL/SAT mode, etc.)
1.
On the remote control, press and hold
SET
until the LED
blinks twice, then release
SET
.
2.
Enter
9
-
9
-
3
and then press
VOL+
.The LED will blink four
times.
3. Volume will again be controlled according to its default states.