O
NE
F
OR
A
LL
10L U
NIVERSAL
R
EMOTE
C
ONTROL
WITH
L
EARNING
12 Using Channel Scan
4.
Press and hold
SET
until the LED blinks
twice, then release
SET
. The macro is
now deleted but the keys (in the case of
POWER
and device keys), will retain
their original function.
USING CHANNEL SCAN
In the
TV
,
VCR
,
DVD
,
CBL
and
SAT
modes, use
the
FAV
key to start a 3-second scan of all
favorite channels (if programmed,
“Programming Favorite Channel Scan” on
page 12) and/or all channels for the selected
mode.
1.
Press
TV
,
VCR
,
DVD
,
CBL
or
SAT
once.
2.
Press
FAV
once.
•
If
Favorite Channel Scan
has been
set up, scanning of favorite
channels will start and cycle
through stored channels, then
proceed to the next channel up
and cycle through all channels on
the selected device.
•
If
Favorite Channel Scan
has not
been set up, scanning will start
with the current channel, then
proceed to the next channel up
and cycle through all channels on
the selected device.
3.
To stop scanning channels at any time,
press any key once.
PROGRAMMING FAVORITE
CHANNEL SCAN
In the
TV
,
VCR
,
DVD
,
CBL
and
SAT
modes, you
can store a list of up to 10 favorite channels,
in any order, that will be immediately
scanned when you press
FAV
(see “Using
Channel Scan” on page 12).
NOTE:
Only channels of one mode can be
stored for Favorite Channel Scan.
1.
On the remote control, press
TV
,
VCR
,
DVD
,
CBL
or
SAT
once.
2.
Press and hold
SET
until the LED (red
light) blinks twice, then release
SET
.
3.
Enter
9 9 6
. The LED will blink twice.
4.
Use the keypad to enter a favorite
channel number (e.g.,
031
). Then press
SET
once.
NOTE:
If the original remote control required
pressing an
ENTER
key to change the channel,
also press the
ENTER
key after the channel
number (e.g.,
0 3 1 ENTER
).
5.
If desired, repeat step 4 (in this
section) for each favorite channel to be
stored, up to a total of 10 channels.
NOTE:
If you try entering more than 10
channels, the remote control will
automatically exit programming.
6.
To exit programming, press and hold
SET
for 3 seconds. The LED will blink
twice.
USING LEARNING
The One For All 10L Universal Remote
Control with Learning (URC-10820 B00)
includes a Learning feature so you can add
functions that are unique to your home
entertainment devices (e.g.,
DVD EJECT
) on
the
L1
~
L3
keys. However, there are some
considerations.
L
EARNING
P
RECAUTIONS
•
Your original remote controls must be
in working order for learning to work
properly.
OFA 10L with Learning Owners Manual.fm Page 12 Thursday, January 27, 2005 1:34 PM
