6
W W W.ONEFORALL.COM
ON
DIP
1 2 3 4 5
Play video on the VCR (source) in the living room and watch the
picture on the TV (destination) in the bedroom.
Connect the transmitter to the VCR and the receiver to the TV in the
bedroom. Switch on the video. Place the Transmitter or the IR eye in front
of the Video. Switch on the TV in the bedroom. Select the mode on the TV
for “Line In” (AV, EXT or channel 0). Start playing the VCR by aiming the
VCR remote control (or a universal remote control) to the receiver unit and
press play. The video should start playing and picture and sound should
appear on your bedroom TV screen.
View with camcorder (source) in the baby bedroom and watch the
picture on the TV (destination) in the living room.
Note: for this application you require another set of cables, not included in
this package. Please refer to the instruction guide of your camcorder to
determine what type of cable is required.
Connect the transmitter to the camcorder and the receiver to the TV in the
living room. Switch on the camcorder and focus on the spot that you want
to watch. Switch on the TV in the living room. Select the mode on the TV
for “Line In” (AV, EXT or channel 0). The picture and sound of the
camcorder should appear on your TV screen in the living room.
Security application.
With this product you are able to build a security system. You can receive
up to four video signals. Note that you require the same amount of
transmitters as video signals you want to receive.
Connect every transmitter to a security camera and connect the receiver to
the TV.
Select a different channel for every transmitter. On the receiver put the dip
switches to the high position if you want to monitor that picture. DIP
switch 5 is used to change the interval time from 8 seconds (in ON position)
to 4 seconds (in OFF position).
Switch on the cameras. Switch on the TV for displaying the various camera
pictures. The picture of the security cameras should appear on the TV on
interval basis.
Examples dip switches:
In this example the receiver will change channels between
channel 1 and 3 every eight seconds.
In this example the receiver will change channels between
channel 1 and 4 every four seconds.
To stop the auto sequence just select 1 channel on the receiver unit.
If no channel is selected it will turn automatically to channel 1.
ON
DIP
1 2 3 4 5
