ASSEMBLY
1. Unpack the carton and place all the parts on the floor.
2. Install the Rear and Front tube (2) to the Main frame (1) with Bolts M8x65mm (17), M8 spring washer (23), M8 curved washer
(25) and M8 nut cap (21), please tighten firmly.
3. Now connect the bottom end of the meter cable (15) to the sensor cable (16).
4. Push the post tube (4) into the main frame and fix with M8 spring washer (23), M8 curved washer (25) and M8x16mm bolts (19).
Tighten them firmly.
5. Fit the Tension Control (7) with M5x16mm screw (20) to Post tube (4).
7
10
2
10
17
10
2
21
23
25
17
23
25
21
1
4
7
23
19
1
15
16
15
19
19
20
23
23
25
25
25
