Evolution Outdoor Dome Camera
QUICK START GUIDE
Copyright 2014 by Oncam Global Group AG. Oncam Grandeye is a trading name of Oncam Global Group AG. All rights reserved. All screen
images are simulated. Specifications and configurations subject to change without notice. Legal Notice: Parts of this product are protected by
patents.
QUICK START GUIDE: Important
Read these instructions carefully before installing or
operating this product.
This product should be installed by a qualified service person
and the installation should conform to local and national
regulations.
This product is not suitable for installation in a ceiling void
that is also used as an air handling space.
For the latest updates of all user manuals, guides and for the
latest camera firmware versions, please look at
www.oncamgrandeye.com/security-systems/
Sensor
5 Megapixel sensor
Ports
RJ45 / 2.1 jack DC / 2.5 audio
Field of view
360
0
Network cable type
CAT5 or better for 100base
Angle of view
180
0
Hemisphere
DIP switch options
#1(N/A); #2 NTSC (on) / PAL (off)
Min
illumination
0.2 Lux
Power
12VDC (min 1Amp) / POE
Frame rate
10 fps @ 4MP / 15 fps @
≤
2MP
Power consumption
8W max
Video Codec
Supports MJPEG / H.264
Operating temperature
-40 to 55°C (-40 to 135°F)
External in/out 1 contact input / 1 contact output
Storage temperature
-40 to 70°C (-40 to 158°F)
Security
Multi-level access with passwords
Water ingress protection
IP66 Rated
Users
Multiple users, 20 simultaneous
Weight
0.92kg (2.03lbs)
Approvals : IEEE802.3af Class 2; EMC: CISPR Class A, FCC; CE, ICES-003; UL60950
Welcome
The Oncam Grandeye Evolution Outdoor 360° IP camera
is designed to be connected to an IP network, and it can
be configured and operated using standard internet
browser software. This quick start guide describes the
installation and configuration procedures for a standard
surface mount camera application.
Technical Support
Oncam Grandeye Evolution IP Camera Installation and
Operation Guide (http://www.oncamgrandeye.com/
security-systems/outdoor-camera/)
Tel:
+1 978 735 4860 x111 (Americas)
+44 (0)844 247 0041 (Rest of the World)
Email:
Note the MAC address
Make a note of the camera’s location and unique MAC
address, which can be found printed on the two camera
labels. This information may be needed during camera
configuration.
PoE/Network Connection
The camera should be connected to the network using CAT5 or
better cable fitted with a RJ45 connector.
Making connections
RESET
GND
IN
1
2
3
4
5
6
(Optional)
LOAD
OUT
GND
3.3V @15mA max
(Sourcing)
1
2
3
4
5
6
0V
Analogue Video Output: PAL (520Lines) BNC connection used for ‘fish eye’
spot monitor / local camera testing. To activate the BNC connection; set dip
switch 2. to: On NTSC / Off PAL.
Audio Input: 3.5mm audio jack.
Power Supply Options
The camera module requires an external supply power to operate.
This can be provided in one of two ways:
1.
Power-over-Ethernet (PoE): Connect the Ethernet cable to the
Ethernet port. Power may be supplied to the camera via PoE
IEEE802.3af through the Ethernet cable.
2.
Direct DC Input: If PoE is not available, use a 12V DC power supply
and wire the correct polarity (center positive).
Analogue Video Output
Direct DC Input
Audio Input
Alarm Connections
Mounting options
The Evolution Outdoor Dome camera is intended for mounting on flat surfaces, such as walls or ceilings. Cabling
can be configured to enter the camera from the side or from within the mounting surface through the rear of the
mounting base. The latter option is recommended where possible to offer improved vandal and tamper resistance.
Note: This product is not suitable for installation in a void that is also used as an air-handling space.
3
1
2
EVO-05NMD (white base)
EVO-05NND (black base)
OG_2014.01.17_R.1.4
