LED screen parameters
:
set the system output resolution format, in real application,we suggest select
the same resolution with the LED screen.
LED screen width
:
range from 320-3840
,
set the LED screen horizontal width
LED screen height
:
range from
240-1920
,
set the LED screen vertical height.
Refresh rate
:
range from
24-60Hz
,
set the LED screen Refresh rate
,
we suggest 60Hz.
Mark
:
restart the device after modify the LED screen parameters ,the system reserved mode will
be cleaned up.
Sending card parameters interface can adjust the network port 1parameters
、
Network port
2parameters
、
Refresh rate
,
used for set Network port display image size and starting position.
Network port 1 parameter
:
Network port 1 width
:
range from 0-2048
,
set LED1 port image horizontal width
。
Network port 1 height
:
range from 0-1024
,
set LED1 port image vertical height
。
Network port 1 starting X
:
range from 0-2048
,
set LED1 port image horizontal starting position
。
Network port 1 starting Y
:
range from 0-1024
,
set LED1 port image vertical starting position
。
Network port 2 parameters
:
Network port 2 width
:
range from 0-2048
,
set LED2 port image horizontal width
。
Network port 2 height
:
range from 0-1024
,
set LED2 port image vertical height
。
Network port 2 starting X
:
range from 0-2048
,
set LED2 port image horizontal starting position
。
Network port 2 starting Y
:
range from 0-1024
,
set LED2port image vertical starting position
。
Refresh rate
:
range from 24-60Hz
,
set LED screen refresh rate
,
we suggest 60Hz.
Output resolution
:
contain 15 kinds of fixed resolution format and 1 “user customized”customized” option
parameters and“LED screen parameters”setting
。
Test diagrams
:
there are 6 test diagrams for LED screen testing.The test diagram requires an
out-of-sync clock, so it is only valid for the DVI/HDMI/VGA input source.When the "normal display" is
selected, the test diagram is closed.In the current signal source, a valid input signal must be received,
and the test diagram has output. Otherwise, there is no output.If the current signal source is DVI, the DVI
port input output is connected, and this function can be realized without external input signal.
image effect menu
sending card parameters
Network port 1 parameters
→
Network port 2 parameters
→
Refresh rate
60
Содержание OVP-M2
Страница 1: ...OVP M2 User Manual OVP M2 user manual ...
Страница 24: ......