©
Semiconductor Components Industries, LLC, 2018
June, 2018
−
Rev. 0
1
Publication Order Number:
EVBUM2565/D
EVBUM2565/D
RSL10 SIP Evaluation and
Development Board
User's Manual
INTRODUCTION
Purpose
This manual provides detailed information about the
configuration and use of the RSL10 SIP Evaluation and
Development Board (RSL10
−
SIP
−
001GEVB). The
Evaluation and Development Board is designed to be used
with the software development tools to evaluate the
performance and capabilities of the RSL10 SIP radio.
Manual Organization
The
Evaluation and Development Board Manual
contains
the following chapters and appendices:
•
Chapter 1: Introduction
describes the purpose of this
manual, describes the target reader, explains how the
book is organized, and provides a list of suggested
reading for more information.
•
Chapter 2: Overview
provides an overview of the
Evaluation and Development Board described in this
manual.
•
Chapter 3: Evaluation and Development Board
provides the details of the Evaluation and Development
Board. The chapter is divided into the following topics:
♦
Development Board Setup
♦
Development Board Design
♦
Power Supply
♦
Level Translators
♦
LED Circuitry
♦
RSL10 SIP
♦
Measuring the Current Consumption
♦
SWJ
−
DP Debug Port
♦
Digital Input/Output (DIO)
♦
Power Supply and Test Points
•
Appendix A: Connectors
provides a complete list of
the connectors and jumpers on the Evaluation and
Development Board.
•
Appendix B: Schematics
contains the schematics for
the Evaluation and Development Board.
•
Appendix C: Bill of Materials
contains a list of the
parts that are used to manufacture the Evaluation and
Development Board.
Further Reading
For more information, refer to the following documents:
•
Getting Started with RSL10
•
RSL10 Firmware Reference
•
RSL10 Hardware Reference
•
RSL10 SIP Datasheet
OVERVIEW
Introduction
The RSL10 SIP Evaluation and Development Board is
used for evaluating the RSL10 SIP and for application
development. The board provides access to all input and
output connections via 0.1
″
standard headers. The on-board
communication interface circuit provides communication to
the board from a host PC. The communication interface
translates RSL10 SIP SWJ
−
DP debug port signals to the
USB of the host PC. There is also an on-board 4-bit level
shifter for debugging; it translates the I/O signal level of the
RSL10 SIP to the 3.3 V digital logic level. It is not enabled
by default; you enable it when it is needed.
Evaluation and Development Board Features
The Evaluation and Development Board enables
developers to evaluate the performance and capabilities of
the RSL10 SIP in addition to developing, demonstrating and
debugging applications.
Key features of the board include:
•
J
−
Link onboard solution provides a SWJ
−
DP
(serial-wire and/or JTAG) interface that enables you to
debug the board via a USB connection with the PC
•
Alternate onboard SWJ
−
DP (serial-wire and/or JTAG)
interface for Arm
®
Cortex
®
−
M3 processor debugging
•
Access to all RSL10 SIP peripherals via standard 0.1
″
headers
•
Onboard 4-bit level translator to translate the LPDSP32
debug interface at low voltage to a 3.3 V JTAG
debugger
•
Integrated antenna (included as part of the RSL10 SIP)
•
Compliance with the Arduino form factor
EVAL BOARD USER’S MANUAL
www.onsemi.com
Downloaded from
