NCP102 Demonstration Board Test Procedure
9.
If Vcc= 5.0VDC (DMM 1), go to Step 12.
10. Adjust the Vcc supply to 5.0VDC, as indicated on DMM 1.
11. Repeat steps 1 through 9 of this section.
12. Verify that Vout (DMM 3) equals zero VDC.
13. Test
complete.
Revision History
Revision Release
Date
Changes Responsible
1
Original Release
Mike Stimbert
1/22/08
4 of 4
REV 1
