ON Semiconductor MT9P004EBMSTCBH-GEVB, Руководство пользователя

Страница: 4 / 5

MT9P004EBMSTCBH − GEVB
www.onsemi.com
4
Table 1. JUMPERS AND HEADERS (continued)
Jumper/Header No. Description Pins Jumper/Header Name
P12 +VDD_TX
1 − 2 (Default) Connects to on-board +VDD_TX power supply
2 − 3 External power supply connection
P13 CLK_SELECT
2 − 3 (Default) Connects to on-board oscillator
1 − 2 Connects to XMCLK from Demo 2X Baseboard
P14, P15 EEPROM ADDR P14 Closed, P15
Open (Default)
EEPROM Address set to 0xA8
P14 Open,
P15 Open
EEPROM Address set to 0xAC
P14 Open,
P15 Closed
EEPROM Address set to 0xA4
P14 Closed,
P15 Closed
EEPROM Address set to 0xA0
P16 GPI0 Open (Default) For various sensor’s settings/connection to external peripherals
P17 GPI1 Open (Default) For various sensor’s settings/connection to external peripherals
P18 GPI2 Open (Default) For various sensor’s settings/connection to external peripherals
P19 GPI3 Open (Default) For various sensor’s settings/connection to external peripherals
SW1 RESET N/A When pushed, 240 ms reset signal will be sent to MT9P004
Interfacing to ON Semiconductor Demo 2X Baseboard
The ON Semiconductor Demo 2X baseboard has a similar
26-pin connector and 13-pin connector which mate with P9
and P36 of the headboard. The four mounting holes secure
the baseboard and the headboard with spacers and screws.