ON Semiconductor MT9P004EBMSTCBH-GEVB, Руководство пользователя

Страница: 3 / 5

MT9P004EBMSTCBH − GEVB
www.onsemi.com
3
Jumper Pin Locations
The jumpers on headboards start with Pin 1 on the leftmost
side of the pin. Grouped jumpers increase in pin size with
each jumper added.
Figure 5. Pin Locations for a Single Jumper.
Pin 1 is Located at the Leftmost Side and Increases as it Moves to the Right
Pin 1 Pins 1 − 4
Figure 6. Pin Locations and Assignments of Grouped Jumpers.
Pin 1 is Located at the Top-Left Corner and Increases in a Zigzag Fashion Shown in the Picture
Pins 1 and 2
Pins 3 and 4
Pins 5 and 6
Pins 7 and 8
Pins 9 and 10
Pin 1
Jumper/Header Functions & Default Positions
Table 1. JUMPERS AND HEADERS
Jumper/Header No. Jumper/Header Name Pins Description
P1 +VPP Open (Default) For connection to external 6.5~7.0 V +VPP power supply for
OTPM
P2 TEST 1 − 2 (Default) Configure to MIPI
2 − 3 Configure to CCP2
P4 FLASH Open (Default) For connection to external flash
P5 SHUTTER Open (Default) For connection to external shutter
P6 +2V8_VAA 1 − 2 (Default) Connects to on-board +2V8_VAA power supply
2 − 3 External power supply connection
P7 +2V8_VAAPIX 1 − 2 (Default) Connects to on-board +2V8_VAAPIX power supply
2 − 3 External power supply connection
P8 ON_LED 1 − 2 (Default) Turn on +5V bus LED indicator
2 − 3 Turn on +5V bus LED indicator
P9 +VDDIO 1 − 2 (Default) Connects to on-board +VDDIO power supply
2 − 3 External power supply connection
P10 +VDD_PLL 1 − 2 (Default) Connects to on-board +VDD_PLL power supply
2 − 3 External power supply connection
P11 +VDD 1 − 2 (Default) Connects to on-board +VDD power supply
2 − 3 External power supply connection