ON Semiconductor MT9M114EBLSTCZH3-GEVB, Руководство пользователя

Страница: 3 / 5

MT9M114EBLSTCZH3 − GEVB
www.onsemi.com
3
Jumper Pin Locations
The jumpers on headboards start with Pin 1 on the leftmost side of the pin. Grouped jumpers increase in pin size with each
jumper added. The ‘L’ shape denotes pin 1.
Figure 5. Pin Locations for a Single Jumper. Pin 1 is Located at the Leftmost Side
and Increases as it Moves to the Right (Except for P11)
Pins 1 − 4 Pin 1
Figure 6. Pin Locations and Assignments of Grouped Jumpers. Pin 1 is Located at the Top-Left Corner and
Increases in a Zigzag Fashion Shown in the Picture (P11 and P15 has different orientation
Pins 1 & 2 Pin 1
Pins 3 & 4
Pins 5 & 6
Pins 7 & 8
Pins 9 & 10
Jumper/Header Functions & Default Positions
Table 1. JUMPERS AND HEADERS
Jumper/Header No. Jumper/Header Name Pins Description
P1 OE_L 1 − 2 (Default) Enable Parallel Interface
2 − 3 Enable MIPI Interface
P2 CONFIG 2 − 3 (Default) Set to Normal Mode
1–2 Suspend State
P3 JTAG Probe 3 (SEN_TRSTN) JTAG_TRSTN
5 (SEN_CONFIG) JTAG_TDI
7 (SEN_CHAIN) JTAG_SMS
9 (SEN_TCK) JTAG_TCK
13 (SEN_FLASH) JTAG_TDO
15 (SEN_JRST) JTAG_RST
P4 FLASH 1 − 2 For Connection to External Flash
P5 TRST 1 − 2 (Default) Set to Normal Mode
2 − 3 Set to Test Mode
P6 SADDR 1 − 2 (Default) Slave Address: 0x90
2 − 3 Slave Address: 0xBA
Open Multi-camera Slave Mode
P7 +VDDIO 1 − 2 (Default) 1.8 V Operation of Sensor
2 − 3 2.8 V Operation of Sensor