ON Semiconductor MT9M034, Руководство пользователя

Страница: 4 / 5

MT9M034I12STMVH − GEVB
www.onsemi.com
4
Table 1. JUMPERS AND HEADERS
(continued)
Jumper/Header No. Description Pins Jumper/Header Name
P9 +0V4_VDD_SLVS
2 − 3 (Default) Connects to on-board +0V4_VDD_SLVS power supply
1 − 2 External power supply connection
P11 TEST
1 − 2 (Default) Set to Normal Mode
2 − 3 Set to Test Mode
P12 STANDBY 1 − 2 (Default) Set to Normal Mode
2 − 3 Set to Standby Mode
P14 SADDR 1 − 2 (Default) I
2
C address set to 0x20
2 − 3 I
2
C address set to 0x30
P15, P16 EEPROM ADDR P15 Closed,
P16 Open (Default)
EEPROM Address set to 0xA8
P15 Open,
P16 Open
EEPROM Address set to 0xAC
P15 Open,
P16 Closed
EEPROM Address set to 0xA4
P15 Closed,
P16 Closed
EEPROM Address set to 0xA0
P17 TRIGGER 2 Trigger Input
P18 ON_LED 1 − 2 (Default) Connects to on-board LED to indicate “power on”
P19 MCLK 2 − 3 (Default) Demo 2X Clock Input Enable
1 − 2 Demo 2X Clock Input Disable
P20 CLK_SELECT 2 − 3 (Default) Select on-board oscillator
1 − 2 Select Demo 2X clock
P21 +1V8_VDD_SLVS 2 − 3 (Default) Connects to on-board +1V8_VDD_SLVS power supply
1 − 2 External power supply connection
P22 +VDD_SLVS_SEL 2 − 3 (Default) Connects to on-board +VDD_SLVS_SEL power supply
1 − 2 External power supply connection
SW10 RESET N/A When pushed, 380 ms reset signal will be sent to MT9M024
Interfacing to ON Semiconductor Demo 2X Baseboard
The ON Semiconductor Demo 2X baseboard has a
similar 26-pin connector and 13-pin connector which mate
with J3 and J4 of the headboard. The four mounting holes
secure the baseboard and the headboard with spacers and
screws.