ON Semiconductor MT9J003I12STMVH-GEVB, Руководство пользователя

Страница: 4 / 5

MT9J003I12STMVH − GEVB
www.onsemi.com
4
Table 1. JUMPERS AND HEADERS
(continued)
Jumper/Header No. Description Pins Jumper/Header Name
JP4 +2V8_VAAPIX
1 − 2 (Default) Connects to on-board +2V8_VAAPIX power supply
2 − 3 Connection to external power supply
JP5 +VDDIO_SOC
1 − 2 (Default) Connects to on-board +VDDIO_SOC power supply
2 − 3 Connection to external power supply
JP6 +2V8_PLL 1 − 2 (Default) Connects to on-board +2V8_PLL power supply
2 − 3 Connection to external power supply
J4 +VPP Open (Default) Connects to exVPP power supply for OTPM
J5 SHUTTER Open (Default) Connects to external shutter
J6 GPIOs Open (Default) Connects to various sensor’s settings
J7 ATEST Open (Default) For debug/test
J8 TEST 2 − 3 (Default) Normal operation
1 − 2 Test mode
SW1 EEPROM ADDR P24 Open,
P23 Closed,
P27 Closed
(Default)
EEPROM Address set to 0xA8
P24 Open,
P23 Open,
P27 Closed
EEPROM Address set to 0xAC
P24 Closed,
P23 Open,
P27 Closed
EEPROM Address set to 0xA4
P24 Closed,
P23 Closed,
P27 Closed
EEPROM Address set to 0xA0
SW2 RESET N/A When pushed, 200 ms reset signal will be sent to MT9J003
SW3 ON_LED
On (Default) Turns on +5V LED indicator
Off Turns off +5V LED indicator
Interfacing to ON Semiconductor Demo 2X Baseboard
The ON Semiconductor Demo 2X baseboard has a
similar 26-pin connector and 13-pin connector which mate
with P1 and P2 of the headboard. The four mounting holes
secure the baseboard and the headboard with spacers and
screws.