MT9F002I12STCUH
−
GEVB
3
Jumper Pin Locations
The jumpers on headboards start with Pin 1 on the leftmost
side of the pin. Grouped jumpers increase in pin size with each
jumper added.
Figure 5. Pin Locations for a Single Jumper.
Pin 1 is Located at the Leftmost Side and Increases as it Moves to the Right
Pin 1
Pins 1
−
4
Figure 6. Pin Locations and Assignments of Grouped Jumpers.
Pin 1 is Located at the Top-Left Corner and Increases in a Zigzag Fashion Shown in the Picture
Pins 1 and 2
Pins 3 and 4
Pins 5 and 6
Pins 7 and 8
Pins 9 and 10
Pin 1
Figure 7. EEPROM Switches in their Defaults Positions.
The First Switch (A2) of SW6 is ON, the Second Switch (A1) is ON
A1
A2
Jumper/Header Functions & Default Positions
Table 1. JUMPERS AND HEADERS
Jumper/Header No.
Jumper/Header Name
Pins
Description
P1
+VPP
Open (Default)
For connection to exVPP power supply (for OTPM)
P4
+VDDIO
2
−
3 (Default)
Connects to on-board +VDDIO power supply
1
−
2
External power supply connection
P5
+1V8_VDD
2
−
3 (Default)
Connects to on-board +1V8_VDD power supply
1
−
2
External power supply connection
P6
+2V8_VAA
2
−
3 (Default)
Connects to on-board +2V8_VAA power supply
1
−
2
External power supply connection
P7
+2V8_VDDPLL
2
−
3 (Default)
Connects to on-board +2V8_VDDPLL power supply
1
−
2
External power supply connection