EVBUM2769/D
5
Downloader Board
Figure 9.
The microcontroller on the Board supports programing of
the flash on the Main Board from your PC. Place shunt
jumpers on pins 2 and 3 of JP101 and turn all switches of
DSW1 off. Reset switch, TSW1 controls the reset status of
the Microcontroller. The reset is active low. With the
Downloader Board connected to the Main Board, TSW1
must be turned to L (low) when debugging.
LAYOUT
Figure 10. Layout of the Main Board of LC786830 Demo Board Kit (Top View)
Figure 11. Layout of the Main Board of LC786830 Demo Board Kit (Bottom View)
