ON Semiconductor FUSB302 Type-C Скачать руководство пользователя страница 12

Страница: 12 / 13

FUSB302GEVB

www.onsemi.com

w,0,0x44,1,0x43,0x02; Data2
w,0,0x44,1,0x43,0xFF; Jam CRC
w,0,0x44,1,0x43,0x14; EOP
w,0,0x44,1,0x43,0xFE; TXOFF
w,0,0x44,1,0x43,0xA1; TXON

VDM

The VDM tab supports Vendor Defined Messages

(VDM). The “Configuration” section is used for configuring
the FUSB302. The upper left “FUSB302” section window
is used for displaying and modifying or adding VDM

information to the EVB. Right

−

clicking on the Sop field

allows you to add SVIDs. Right clicking on an SVID allows
you to remove the SVID or add a Mode. Right

−

clicking on

a Mode allows you to remove it.

Retrieving VDM information from a connected device

can be done in the lower left “Other” section window.
Right

−

clicking on Sop allows you to request Discover

Identity or Discover SVIDs. Right

−

clicking on a SVID

allows you to request Discover Modes. Right

−

clicking on a

Mode allows you to request to Enter or Exit that Mode.

Figure 11. VDM Tab

USB Type

−

C and USB

−

C are trademarks of USB Implementers Forum.

Содержание FUSB302 Type-C














Результаты поиска

Содержание FUSB302 Type-C

Отзывы:

Похожие инструкции для FUSB302 Type-C

Бренды по названию

Популярные бренды

ON Semiconductor FUSB302 Type-C, Руководство пользователя

Результаты поиска

Содержание FUSB302 Type-C

Отзывы:

Похожие инструкции для FUSB302 Type-C

Бренды по названию

Популярные бренды