ON Semiconductor AP0101AT, Руководство пользователя

Страница: 5 / 6

AP0101AT2L00XPGAH − GEVB
www.onsemi.com
5
Table 1. JUMPERS AND HEADERS
(continued)
Jumper/Header No. Description Pins Jumper/Header Name
P47, P48, P59 EEPROM ADDR P47 1 − 2,
P48 Open,
P59 Open
(Default)
EEPROM Address Set to 0xAA (Default)
P47 1 − 2,
P48 1 − 2,
P59 Open
EEPROM Address Set to 0xA2
P47 Open,
P48 1 − 2,
P59 Open
EEPROM Address Set to 0xA6
P47 Open,
P48 Open,
P59 Open
EEPROM Address Set to 0xAE
P50 SEN_SDATA 2 − 3 (Default) AP0101 Serial Control
1 − 2 Demo 2
×
Serial Control
P51 SEN_RST_OUT
1 − 2 (Default) AP0101 Reset
2 − 3 Demo 2 × Reset
P52 BEAGLE_SCL
1 − 2 (Default) Demo 2 × Accessed
2 − 3 Sensor Accessed
P53 BEAGLE_SDA 1 − 2 (Default) Demo 2 × Accessed
2 − 3 Sensor Accessed
P54 FRAME_SYNC_BAR
2 External Input Signal to FRAME_SYNC
1 GND
SW7 RESET N/A When Pushed, 240 ms Reset Signal will be Sent to
AP0101
Interfacing to ON Semiconductor Demo 2 y Baseboard
The ON Semiconductor 2
×
baseboard has a similar 26-pin
connector and 13-pin connector which mate with J5 and J6
of the headboard. The four mounting holes secure the
baseboard and the headboard with spacers and screws.