ON Semiconductor AP0101AT, Руководство пользователя

Страница: 4 / 6

AP0101AT2L00XPGAH − GEVB
www.onsemi.com
4
Table 1. JUMPERS AND HEADERS
(continued)
Jumper/Header No. Description Pins Jumper/Header Name
P12 +HVDDIO 1 − 2 (Default) Connects to On-Board +HVDDIO Power Supply
2 − 3 External Power Supply Connection
P14 +OTPM_VCC
1 − 2 (Default) Connects to On-Board +OTPM_VCC Power Supply
2 − 3 External Power Supply Connection
P15 +5V0
1 − 2 (Default) USB +5V0_BUS Power Supply Connection
2 − 3 Connects to On-Board +5V0_EXT Power Supply
P16 CLK_SELECT 1 − 2 (Default) Connects to On-Board Oscillator
2 − 3 Connects to XMCLK from Demo2
×
Baseboard
P17 GPIO1_LED
Open (Default) Off Frame LED
1 − 2 On Frame LED
P19 +VDD_REG
1 − 2 (Default) Connects to On-Board +1V8_VDD_REG Power Supply
2 − 3 External Power Supply Connection
P20 +VCCIO
1 − 2 (Default) Connects to On-Board +VCCIO Power Supply
2 − 3 External Power Supply Connection
P21 +1V2_VCCINT
1 − 2 (Default) Connects to On-Board +1V2_VCCINT Power Supply
2 − 3 External Power Supply Connection
P22, P23 OSC/XTAL Selection
P22 2 − 3,
P23 Open (Default)
Selects Oscillator as AP0101 Input Clock
P22 2 − 3,
P23 1 − 2
Selects Crystal as AP0101 Input Clock
P24 +2V5_VCCA
1 − 2 (Default) Connects to On-Board +2V5_VCCA Power Suppl
2 − 3 External Power Supply Connection
P26 +VDD 1 − 2 (Default) Connects to On-Board +1V2_VDD_REG Power Supply
2 − 3 External Power Supply Connection
P28 UART Transceiver
Open (Default) Turn Off UART Transceiver
1 − 2 Turn On UART Transceiver
P30 SEN_CLK
Open (Default) Beagle Serial No Access to Demo 2 × & Sensor
1 − 2 Beagle Serial Access to Demo 2 × & Sensor
P31 SEN_DATA Open (Default) Beagle Serial No Access to Demo 2 × & Sensor
1 − 2 Beagle Serial Access to Demo 2
×
& Sensor
P32 +3V3_HVCCIO
2 − 3 (Default) Connects to On-Board +3V3_HVCCIO
1 − 2 External Power Supply Connection
P33 FRAME_SYNC
1 − 2 (Default) Demo 2 × Access to SYNC Signal
Open Demo 2 × No Access to SYNC Signal
P43 SP1_SDO/SDI
1 − 2 (Default) Beagle SPI Access to Demo 2 × & Sensor
Open Beagle SPI No Access to Demo 2
×
& Sensor
P44 SP1_SCLK/CS_N
1 − 2 (Default) Beagle SPI Access to Demo 2 × & Sensor
Open Beagle SPI No Access to Demo 2 × & Sensor
P45 SPI_EN
Open (Default) Data or GND; AP0101 in FLASH/HOST Mode
1 − 2 High Z; AP0101 in Auto-Config Mode