AGB3N0CS−GEVK
www.onsemi.com
4
Table 2. 14-PIN DEMO 2X BASEBOARD CONNECTOR FUNCTION DESCRIPTION (P4)
Pin
Name
Description
DIR
Comment
1
GND
Ground
PWR
2
S_DATA4
Parallel Data4
I/O
Parallel Data Bit
3
S_DATA5
Parallel Data5
I/O
Parallel Data Bit
4
S_DATA2
Parallel Data2
I/O
Parallel Data Bit
5
S_DATA3
Parallel Data3
I/O
Parallel Data Bit
6
S_DATA0
Parallel Data0
I/O
Parallel Data Bit
7
S_DATA1
Parallel Data1
I/O
Parallel Data Bit
8
S_SP0
General Control Signal 0
Out
Signal @ +3.3 V Level
9
S_SP1
General Control Signal 1
Out
Signal @ +3.3 V Level
10
S_SP2
General Control Signal 2
Out
Signal @ +3.3 V Level
11
S_SP3
General Control Signal 3
Out
Signal @ +3.3 V Level
12
S_SP4
General Control Signal 4
Out
Signal @ +3.3 V Level
13
+3V3_HEAD
+3.3 V to Headboard
PWR
For Powering Up the Headboard
14
GND
Ground
PWR
ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
EVBUM2313/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
