Operations
Pre-Dive Checks
•
Check all fittings and connections for damaged components (cracks, tears, etc.)
•
Inflate each bladder until the dump valve vents, leave inflated for 30 minutes.
•
On dual bladder models test each bladder separately (do not inflate both bladders at the
same time)
•
With the bladder fully inflated check that pull dump cord or folds in the bladder are not
trapped by the retraction bands
•
Check the security of weight systems before entering the water.
•
After entry, inspect units for bubbles indicating leaks.
•
Test pull dumps for smooth operation and positive seal.
Operations
•
WARNING:
Before using this buoyancy compensator (BC), you must receive in-
struction and certification in SCUBA diving and buoyancy control from a recognized
training agency. Use of SCUBA equipment by uncertified or untrained persons is dangerous
and can result in injury or death.
•
Inflate the bladder with short controlled bursts of air by pressing the inflate button.
•
The unit can be inflated orally through the oral inflator. Depress the deflate button
completely and exhale into the oral inflator.
•
On dual bladder models, the bladder against the diver’s back is the primary bladder. Do not
inflate both bladders at the same time. This could decrease the overall lift provided by the
jacket.
•
Deflate the jacket by pressing the deflate button on the inflator or by pulling a pull dump.
Use proper descent techniques taught in scuba training.
WARNING! Repeated improper use of the Oral Inflation/ Deflation mechanism or dump
valves assemblies may allow water to enter the BC with a subsequent reduction in buoyancy.
Reduced buoyancy can cause a loss of buoyancy control resulting in PERSONAL INJURY
OR DEATH
Post-Dive Checks
•
Connect the inflator to an air supply to pressurize the inflator mechanism then use a garden
hose to direct fresh water into the oral inflator while pressing the deflate button.
•
Partially inflate the unit and allow the water to wash around the interior of the bladder.
Drain completely and store partially inflated away from temperature extremes and direct
sunlight.
•
Do not attempt to service a malfunctioning piece of equipment. Take it to an authorized
OMS dealer for repair.
