Assembly of the IQ Pack Harness System
Attaching the Single Tank Adaptor
The OMS single tank adaptor may be used to secure a single tank to an IQ Pack that has a back
plate installed. To install a back plate, grasp the top of the IQ Pack’s back pad and peel it
completely downward revealing an opening at the bottom of the harness. Slide a back plate up into
the slot aligning the grommet holes with the bolt holes in the back plate. Insert the bolt studs of the
Single Tank Adaptor through the grommet holes in the back of the bladder through the boltholes of
the back plate and through the corresponding holes in the harness. Hold the adaptor, bladder and
harness together and place the large washer over the bolt stud then the split lock washer followed by
the wing nut. Tighten the wing nut securely then press the back pad back into place against the
Velcro strips.
