Omron ZUV Series, Руководство пользователя

Страница: 9 / 126

7
ZUV
User’s Manual
In
troduct
ion
Introduction
Precautions for Safe Use
Please observe the following precautions for safe use of the product:
1.Installation Environment
• Do not use the product in environments where it can be exposed to inflammable/
explosive gas.
• To ensure safety of operation and maintenance, do not install the product close to
high-voltage devices and power devices.
2.Power Supply and Wiring
• When using an AC power supply, use the AC adaptor (supplied with the product, 100
to 240 VAC ±10%).
• When using a DC power supply, the supply voltage must be within the rated range (24
VDC ±10%). In addition, reverse connection of the power supply is not allowed.
Recommended power source: S8VS-18024 (24 VDC 7.5A) by OMRON
• Open-collector outputs should not be short-circuited.
• Use the power supply within the rated load.
• High-voltage lines and power lines must be wired separately from this product. Wiring
them together or placing them in the same duct may cause induction, resulting in
malfunction or damage.
• Should you notice any abnormalities such as smoke, abnormal heat of the product
surface, and/or any foul odor, immediately stop use, turn OFF the power supply, and
disconnect the power plug from the outlet. Contact your OMRON representative for
repair of the product. Repairing it by yourself may cause danger.
3.Irradiation Head
• Do not touch the head or lens for an extended period while there is UV light
irradiation. Doing so may cause a burn injury.
4.Applicable standards
• EN61326-1
• Electromagnetic environment: Industrial electromagnetic environment
(EN/IEC 61326-1 Table 2)
5.Other
• Do not attempt to dismantle, repair, or modify the product. Doing so may cause the
product to not operate correctly as well as cause a malfunction resulting in a fire or an
electric shock.
• Dispose of this product as industrial waste.
• Do not drop the product.
If the product is dropped or damaged, turn OFF the power supply, disconnect the power
plug from the outlet, and contact your OMRON representative. Using it continuously
without repair may cause a fire.
Precautions for Safe Use