![background image](http://html1.mh-extra.com/html/omron/zuv-series/zuv-series_user-manual_743261031.webp)
2-5
ZUV
User’s Manual
Sec
tion 2
ZUV BASIC
OPERA
T
ION
Section 2
Let's Try Irradiation
Irradiating at Constant Power
In this irradiation mode, irradiation is performed continuously at constant irradiation power
for a specified time.
This section describes the procedures from setting the irradiation power to "65%" and the
irradiation time to "60 seconds" up to irradiating UV light.
Irradiation power can be set at a percentage (%) when the maximum power setting is 100.
Setting the irradiation mode
1.
Set the irradiation mode in the LOCK mode top
menu.
When the ZUV is in the READY mode, turn the key
switch to the [LOCK] position to switch to the LOCK
mode.
• Check to see if the LOCK mode setting menu is
displayed on the LCD screen.
• When the password function is enabled, the
password must be entered.
2.
Move the cursor to the irradiation power/time to change for each channel
using the
keys, and press the SET key to apply the setting.
The uppermost digit is displayed on a white background.
Irradiation power
(%)
Irradiation time (s)
CH1
Irradiation power
display area
Irradiation time
display area
<LOCK mode top menu>
Содержание ZUV Series
