![background image](http://html1.mh-extra.com/html/omron/zuv-series/zuv-series_user-manual_743261029.webp)
2-3
ZUV
User’s Manual
Sec
tion 2
ZUV BASIC
OPERA
T
ION
Section 2
Starting Up and Shutting Down
■
Shutting Down
Save the setting data before turning OFF the power supply. All settings will be deleted if
you turn the power OFF without saving the data.
Saving the setting data
1.
Press the
key to save setting data.
The save confirmation message is displayed.
The save confirmation message is displayed when
the mode is switched to the READY mode without
saving the setting data using the MENU key. The
save confirmation message is displayed only when
the settings have been changed. Otherwise, it is not
displayed.
2.
Move the cursor to [EXE] using the
keys, and press the SET key.
Turning OFF the power
3.
Turn the key of the key switch on the
controller front to the [LOCK] position.
4.
Set the power switch on the controller rear to
OFF.
• Remove the key from the key switch when the
controller is not restarted.
• The ON/OFF direction differs between the AC
power supply and the DC power supply.
SAVE
SETTING DATA
EXE CAN
Power supply
switch
Содержание ZUV Series
