Omron Z4M-W10, Руководство пользователя

Страница: 3 / 14

Note: 1. The FS (Full Scale) value (listed in the preceding table) is calculated as follows:
Example: 1% FS on the Z4M-W40
Distance full scale conversion: 20 mm x 0.01 = 0.2 mm
Voltage full scale conversion: 8 V x 0.01 = 80 mV
Part Number Z4M-W40 Z4M-W100
Distance full scale 20 mm 80 mm
Voltage full scale (The value changes
according to the span to be adjusted.) 8 V
±
30% 8 V
±
30%
2. The linearity of the Sensor is checked with a
white alumina ceramic object. The peak-to-peak
value deviated from the displacement linear output
voltage is within the specified range as shown in
the graph. The deviation value may vary with the
object. (Refer to the preceding table.)
1% max.
30 50
Output
vol
tage
(V
)
4
--4
Distance (mm)
3. The response speed of the Sensor is the
time required for the analog displacement
output to increase from 10% to 90% of the
full value (at the rise time) or decrease from
90% to 10% of the full value (at the fall time).
To decrease the error ratio to within 1% at
the rise time, the time required will be two or
three times as long as the specified value.
(Refer to the preceding table.)
Displacement
Displacement
output
90%
10%
90%
10%
Response time Response time
CHARACTERISTICS
Power supply voltage 12 to 24 VDC
±
10%, ripple (p-p): 10% max.
Current consumption 120 mA max.
Dielectric strength Sensor: 1,000 VAC, 50/60 Hz for 1 min.
Amplifier: 300 VAC, 50/60 Hz for 1 min.
Vibration resistance Destruction: 10 to 55 Hz (1.5-mm double amplitude) for 32 minutes each in X, Y, and Z
directions
Shock resistance Destruction: 300 m/s
2
, 30G for 3 times each in
±
X, Y, and Z directions
Ambient temperature Operating: 0
°
to 50
°
C (32
°
to 122
°
F) with no icing
Ambient humidity Operating: 35% to 85% (with no condensation)
Ambient illumination Operating: 3,000 lux max. (incandescent lamp)
Weight Sensor: Approx. 180 g (6.35 oz.) with 2-m cable
Amplifier: Approx. 200 g (7.05 oz.) without cable
Material Sensor: Aluminum diecast
Amplifier: ABS
Enclosure rating IP40
Accessories supplied Flat-blade screwdriver for Sensor adjustment, FDA Caution Label
Engineering Data
LINEAR OUTPUT vs
.
SENSING DISTANCE
Z4M-W40 Z4M-W100
Li
near
output
(V
)
Measurement range
(20 mm)
Sensing distance
Li
near
output
(V
)
Measurement range
(80 mm)
Sensing distance
Note: The linear output of the Sensor is locked between 6 and 8 V when the object is outside the measurement range or when the en-
able output is OFF. It is also locked between 6 and 8 V for 3 to 10 s after the Sensor is turned on, at which time there is no laser
emission.
Z4M Z4M