Omron V680 Series, Руководство пользователя

Страница: 56 / 158

54
Section 2
Communicat
ions Te
st
RFID System
User's Manual
Section 2
Communications Preparations
Communications Test between Host Device and Hand-held
Reader/Writer
Use the test command to test communications between the Hand-held Reader/Writer and host device.
Before performing communications with the RF Tag, check the Hand-held Reader/Writer connections
and communications.
1.
Send the test command from the host device.
For detail on the test command, refer to TEST (TS) .
p.79
,
p.110
2.
If communications is normal, the Hand-held Reader/Writer will return the received data.
If a response is not returned, refer to Troubleshooting .
p.127
Communications Test between RF Tags and Hand-held Reader/
Writer
Use actual commands to test communications between the RF Tags and the Hand-held Reader/Writer.
1.
Send the READ command (RD) with an SA communications specification from the host device.
For details on the READ command, refer to READ (RD) .
If using V600 commands, refer to the Auto Read command (AR).
p.65
,
p.92
The Hand-held Reader/Writer will communicate with the RF Tag and the operation indicator will flash green.
2.
Move the antenna of the Hand-held Reader/Writer close to the RF Tag.
The Hand-held Reader/Writer will read the data in the RF Tag when the Hand-held Reader/Writer moves within the interrogation
zone. As a result, the operation indicator will light green and then turn OFF.