Omron V670-CF01 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 92

Omron V670-CF01 Скачать руководство пользователя страница 4

2

In

tr

od
uc
tion

Intr

oduc

tion

Electromagnetic Inductive RFID System

User's Manual

Introduction

Introduction

OMRON products are manufactured for use according to proper procedures by a qualified operator and only for the

purposes described in this manual. Observe the following precautions when using

a

V670-series Electromagnetic

Inductive RFID System.

•

Read and understand this manual before attempting to use the product and use the product correctly.

•

Keep this manual in a safe but accessible location so that it can be used as reference when required.

Read and Understand this User’s Manual

Please read and understand this instruction manual before storing, installing, programming, operating, maintaining, or
disposing of the products. Please consult your OMRON representative if you have any questions or comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one
year (or other period if specified) from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGE-
MENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR
USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL
SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRAN-
TIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is
asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING
THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED,
STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAP-
PROPRIATE MODIFICATION OR REPAIR.

«
...
2
3
4
5
6
...
»

Содержание V670-CF01





























































































Отзывы:

Нет отзывов