![background image](http://html1.mh-extra.com/html/omron/v400-h101/v400-h101_user-manual_741429017.webp)
15
V400-H101/201
User’s Manual
S
ect
io
n
1
O
p
er
at
io
n
O
ver
view
Section 1
Product Overview
Operation Overview
Section 2 p.17
Prepare the required components and connect them.
Main Peripheral Devices
•
Cable
•
Power supply device
•
Contactor
•
Stand
Section 3 p.31
Turn ON the power and press the trigger buttons to
read the code.
•
Reading method
•
Field of view setting
•
Display details
Section 4 p.39
Basic settings for the Handheld 2D Code Reader
are not required, but settings must be changed
using the Special Tool 2DCR Configear under
the following circumstances.
•
To change the communication condi-
tions (See note.)
•
To use various functions
These settings can be changed in the Handheld
2D Code Reader using a Memory Card or the communications functions of the 2DCR
Configear.
Note: The default settings are as follows:
Baud rate: 9, 600 bps; Parity: None; Data length: 8 bits; Stop bits: 1 bit
Installation and Connections
Reading 2D Code
System Settings