6
Motion controllers
Ordering information
Motion controller
MECHATROLINK-II - related devices
Servo system
Note:
Refer to servo systems section for detailed information
Frequency inverters
Note:
Refer to frequency inverters section for detailed information
Computer software
Name
Model
MECHATROLINK-II Trajexia motion control unit
CJ1W-MCH72
Name
Remarks
Model
MECHATROLINK-II cables
0.5 meter
JEPMC-W6003-A5
1 meter
JEPMC-W6003-01
3 meters
JEPMC-W6003-03
5 meters
JEPMC-W6003-05
10 meters
JEPMC-W6003-10
20 meters
JEPMC-W6003-20
30 meters
JEPMC-W6003-30
MECHATROLINK-II terminator
Terminating resistor
JEPMC-W6022
MECHATROLINK-II interface units For Sigma-II series servo drives. (Firmware version 38 or later)
JUSP-NS115
For Varispeed V7 inverter
(for inverter version support contact your OMRON sales office)
SI-T/V7
For Varispeed F7, G7 inverter
(for inverter version support contact your OMRON sales office)
SI-T
MECHATROLINK-II repeater
When 17 or more axes are connected to the MECHATROLINK-II the repeater is required
JEPMC-REP2000
Specifications
Model
Trajexia Studio V1.0 or higher (Available with CX-One license)
CX-One
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. I54E-EN-01
11
Motion controllers
