Omron SYSMAC WS02-NSFC1-E, Руководство по установке

Страница: 14 / 23

Features of the Face Plate Auto-Builder for NS
Section 1-1
2
1-1 Features of the Face Plate Auto-Builder for NS
The Face Plate Auto-Builder for NS is a software package that automatically
builds project files for NS-series Programmable Terminals that are used for
monitoring and tuning the CS1W-LC001 Loop Control Unit or CS1W-LCB01,
CS1W-LCB05, and CS1D-LCB05D Loop Control Boards.
Based on a CSV tag file created using the CX-Process Tool, the software
automatically builds a NS-series project file configured with Face Plate
Screens for the Loop Control Unit/Board.
1-1-1 Features
• By simply specifying the tag file created using the CX-Process Tool, the
software automatically builds a project file for an OMRON NS-series
Programmable Terminal. The project file is configured with Face Plate
Screens of the Loop Control Unit/Board.
• The project file created with the Face Plate Auto-Builder for NS enable
monitoring and tuning the function blocks for up to 32 loops (PID, etc.) in
the Loop Control Unit or Loop Control Board from the NS-series
Programmable Terminal.
• Face Plate Screens can be built for the following function blocks of Loop
Control Unit or Board.
2-position ON/OFF (Block Model 001)
3-position ON/OFF (Block Model 002)
Basic PID (Block Model 011)
Advanced PID (Block Model 012)
Indication and Operation (Block Model 032)
Indicator (Block Model 034)
Segment Program 2 (Block Model 157)
NS-Designer
(Screen creation software for NS-series
PTs)
• Used to edit data after creation
• Used to create other required screens
CX-Process Tool
(Programming software for Loop Control
Units/Boards)
• Used to create function block programs
• Use to output CSV tag data
CSV tag file for Loop
Control Unit/Board
NS project file
Face Plate Auto-
Builder for NS
1-2 System Requirements
The following hardware and software is required to install and operate the
Face Plate Auto-Builder for NS.
1-2-1 Computer
An IBM PC/AT or compatible computer capable of running Windows 95 (OSR2
or later), 98, Me, NT4.0 (Service Pack 3 or later), or 2000.
(Intel Celeron 400 MHz or higher with least 32 MB of memory recommended.
At least 200 MB of space on the hard disk.)