0.00
100.00
0.01
0.00
100.00
0.01
0.05
100.05
0.06
enter
M
r
e
t
n
e
0.00
100.00
0.01
0.00
100.00
0.01
0.05
100.05
0.06
enter
M
r
e
t
n
e
0.00
100.00
0.01
0.00
100.00
0.01
0.05
100.05
0.06
enter
M
r
e
t
n
e
0.00
100.00
0.01
0.00
100.00
0.01
0.05
100.05
0.06
enter
M
r
e
t
n
e
0.00
100.00
0.01
0.00
100.00
0.01
0.05
100.05
0.06
enter
M
r
e
t
n
e
Simple and user friendly
Easy to use input editor with smart input function
When you begin typing an instruction in ladder editor mode, suggested instructions are displayed.
only commercially available USB cables required
CP1E CPU Units use USB for the peripheral port. Computers can be connected using commercially available USB cables.
Without the need for USB conversion cables or special cables, connection is easier and cable cost is low.
i/o status at a glance
The terminal layout display features I/O indicators. The indicators are in the same position as the terminals to let you see
the I/O status at a glance. You can easily identify I/O status or perform status checks at startup or during operation.
Easy to reuse ladder programming
Copying with address incrementing
To create the same group of ladder instructions more than
once with the address addition copy function, the instructions
can be reused simply by inputting an address offset.
intuitive menu structure
Intuitive menu display
An intuitively designed menu structure makes it easy to
see the overall system simply by looking at the menu
for smooth operation without referring to a manual.
User-friendly ladder program input
Automatic connecting line insertions
With the Automatic connecting line insertions
function the necessary connection is added
automatically based on the curser position.
Automatic column insertion when inserting instructions
The column is automatically inserted when an instruction
is added even if the curser is above another instruction.
Smart Input Function
Guidance display
When an instruction is input at the curser, a
connecting line is automatically inserted.
When an instruction is input at the curser, a column
is automatically inserted for the instruction.
Offset set to 5 bits…
Commercially
available USB cable
Support
software
Sensors
ON ON OFF ON
Visible
status
The function required for
process is grouping.
When you begin typing
an instruction in ladder
editor mode, suggested
instructions are
displayed.
Select the desired
instruction and the
addresses will be set to
one higher than the
addresses M that were
previously entered.
Enter the operands.
I/O comments can
also be entered at the
same time.
EaSy
