Omron STC-OSB250CL, Технические характеристики и руководство пользователя

Страница: 38 / 48

No.18S075-00
38/48
STC-OSB250CL
Product Specifications
and User’s Guide
Command No. Command Description
DEH:
DEF_M [7..0] [Defective Pixel Correction mode] Default data: DCP_MODE [7..0] = 1
D7 D6 D5 D4 D3 D2 D1 D0
D7 to D2 No Function Always sets
as “0000000”
D1 Highlight corrected pixel 0: Disable 1: Enable
D0 Defective pixel
correction 0: Disable 1: Enable
The corrected pixel is appeared with highlight when
“Highlight corrected pixel” is enabled.
DFH:
DCP_BANK [7..0] [Bank address for Defective pixel coordination] Default: DCP_BANK [7..0] = 1
DEH:
DEF_M2 [7..0] [CL output TAP] Default data: CAM_TAP_REG[1..0] = 3
D7 D6 D5 D4 D3 D2 D1 D0
D7 to D2 No Function Always sets
as “000000”
D1 to D0 TAP Configuration 2: 8TAP 3: 10TAP
Others: No Function
F0H:
SP_CONT_L
[7..0] [Signal assignment for 6pin connector] Default: SP_CONT_L [7..0] = 00H
D7 D6 D5 D4 D3 D2 D1 D0
6pin
connector
No. 5 No. 4 Nol. 3 No. 2
Addr = F0H SP1 SP2 SP3 SP4
0 Trigger after filtering
output
LVAL output FVAL output Trigger input
1 F1h.0 F1h.1 F1h.2 F1h.3
2 Trigger after filtering
output
Exposing (HIGH)
output
Exposing (LOW)
output
Trigger input
7 LVAL output CC1 output Exposing
(HIGHT)
output
FVAL output
10 Trigger after filtering
output (inverted)
LVAL output FVAL output Trigger input
Others No Function
F1H:
SP_CONT_H
[7..0] [Input / output setting / status of 6pin connector] Default: SP_CONT_H [7..0] = 8XH (* X is variable)
D7 D6 D5 D4 D3 D2 D1 D0
D7 to D4 SP4 Input / Output
setting 0: Output 1: Input
D6 SP3 Input / Output
setting 0: Output 1: Input
D5 SP2 Input / Output
setting 0: Output 1: Input
D4 SP1 Input / Output
setting 0: Output 1: Input
D3 to D0 Status of SP4 to SP1 Display Input / Output status of SP4 to SP1