No.19S019-01
1
9
STC-APB503PCL / STC-APC503PCL
Product Specifications and Use’s Guide
3.5.2
Power-I/O Connector
HR10A-7R-6PB (Hirose) or equivalent connector x 1
This connector is for DC12V power input and the input and output signals.
Please use HR10A-7P-6S (Hirose) or equivalent connector for the connecting cable.
Pin assignment
Pin
No.
Signal Name
IN / OUT
Voltage
Consumption
Low voltage
High voltage
1
GND
IN
0V
2
Trigger
IN
0 to +0.99 V
+2.3 to +3.6 V
5
μA (typ.) (*1)
3
FVAL
OUT
0 V
+3.3 V
10 mA (Max.) (*2)
4
LVAL
OUT
0 V
+3.3 V
10 mA (Max.) (*2)
5
Trigger Filter
OUT
0 V
+3.3 V
10 mA (Max.) (*2)
6
DC12V
IN
+12 V
The trigger signal input connector is selectable from below two connectors by the camera control command.
Camera Link connector: CC1
Power-I/O connector: 2pin
(*1) The power consumption when the high voltage trigger signal input to the input port.
(*2) The power consumption for the output port has to be managed less than 10 mA.