No.16S058-01
10/49
STC-HD133 Series (STC-HD133DV / STC-HD133SDI) /
STC-HD93 Series (STC-HD93DV / STC-HD93SDI) Users guide
4) GAMMA
Sets the gamma (Default: PRESET(0.70))
The gamma setting selects from PRESET(0.70), 0.30, 0.45, 0.50, 0.60, 0.70, 0.80, 0.90 and 1.00.
5) OFFSET
Sets the offset of the image. (Default: 0)
6) CONTRAST
Sets the contrast of the image. (Default: 128)
7) SHARPNESS
Sets the sharpness (edge enhancement) of the image. (Default: 0)
a) H (Default: 4)
Sets the horizontal sharpness
The image becomes sharper image when increasing this setting.
b) V (Default: 6)
Sets the vertical sharpness.
The image becomes sharper image when increasing this setting.
c) CORING (Default: 3)
The noise level also emphasizes when using the sharpness function.
The SN ratio deteriorate for the other than the edge parts is prevented by cutting the signal level
that smaller than this setting.
The image becomes the soft image if this setting sets too large.
8) MIRROR
Selects the flip image setting for the video output from below two flip modes. (Default: OFF)
a) OFF
The standard image (No flip image) is output.
b) ON
The horizontal flip image is output.
