S8VK-G
22
Period and Terms of Warranty
Warranty Period
The product warranty is valid for a period of three years from the date
of shipment from the factory.
Terms of Warranty
The warranty is valid only for the following operating conditions.
1.
Average ambient operating temperature of the product: 40°C max.
2.
Average load rate: 80% max.
3.
Mounting method: Standard mounting
*
The maximum ratings must be within the derating curve.
If the product fails for reasons attributable to OMRON within the
above warranty period, OMRON will repair or replace the faulty part
of the product at the place of purchase or the place where the product
delivered without charge.
This warranty does not cover the following types of failures.
Recommended Replacement Periods and Periodic Replacement for
Preventive Maintenance
The recommended replacement period for preventive maintenance is
greatly influenced by the application environment of the product. As a
guideline, the recommended replacement period is 7 to 10 years.*
To prevent failures or accidents that can be caused by using a product
beyond its service live, we recommend that you replace the product
as early as possible within the recommended replacement period.
However, bear in mind that the recommended replacement period is
for reference only and does not guarantee the life of the product.
Many electronic components are used in the product and the product
depends on the correct operation of these components to achieve the
original product functions and performance.
However, the influence of the ambient temperature on aluminum
electrolytic capacitors is large, and the service life is reduced by half
for each 10°C rise in temperature (Arrhenius law).
When the capacity reduction life of the electrolytic capacitor is
reached, the product failures or accidents may occur.
We therefore recommend that you replace the product periodically to
minimize product failures or accidents in advance.
*
The recommended replacement period applies under the following
conditions: rated input voltage, load rate of 50% max., ambient
temperature of 40°C max., and the standard mounting method.
This product model is designed with a service life of 10 years
minimum under the above conditions.
(1)
Failures that result from handling or operation of the product under conditions or in environments that are not given in this document and
not given in any other specifications exchanged between OMRON and the customer
(2)
Failures that originate in causes other than the delivered product itself
(3)
Failures caused by disassembly, modification, or repair of the product by anyone other than OMRON
(4)
Failures caused by applications or uses for which the product was not originally intended
(5)
Failures caused by factors that could not be anticipated with the scientific or technical knowledge available when the product was shipped
(6)
Failures caused by other causes for which OMRON is not responsible, such as natural disasters and other acts of God
This warranty is limited to the individual product that was delivered and does not cover any secondary, subsequent, or related damages.