Omron Promi-SD 205-OA Скачать руководство пользователя страница 40

Страница: 40 / 57

Promi-SD User Manual – Appendix A. AT Commands

A-9

SD Response

OK
CONNECT 112233445566

OK
ERROR

Purpose

Connect to the Bluetooth device with given BD address

Parameters

112233445566=BD address

Description

Promi-SD attempts to connect to the Bluetooth device with the given BD address. To

make successful connection, the Bluetooth device must be in Page scan. This attempt

continues for 5 minutes.
If it fails to make connection, SD response is ERROR .

Reference

AT+BTINQ?, AT+BTSCAN

Example

ATD000B530011FF

21 ATH

SD Response

OK
DISCONNECT

Purpose

Release the current connection

Description

The current Bluetooth connection is released normally. It takes about 30 seconds to

detect an abnormal disconnection such as power off and moving out of service range.

Reference

ATD, AT+BTSCAN

22 AT+BTKEY=

$string

SD Response

Purpose

Change pin code

Parameters

$string

= New pin code (Default= 1234 )

Description

Pin code is a string, which allows 16 alpha-numeric characters maximum. Based on this

pin code, Promi-SD generates a link key which is used in actual authentication process.

Reference

AT+BTCSD, AT+BTFP, AT+BTSD?, AT+BTSEC, ATZ, AT&F

Example

AT+BTKEY= apple

23 AT+BTSD?

SD Response

112233445566
OK

Purpose

Display the list of Bluetooth devices sharing the pin code

Description

Once a connection is made with pin code, Promi-SD saves the Bluetooth device with its

link key generated by pin code. The connection to a device listed in Promi-SD can be

made automatically without authentication process. The maximum number of the list

is 5.

Reference

AT+BTCSD, AT+BTFP, AT+BTKEY, AT+BTSEC, ATZ, AT&F

24 AT+BTCSD

SD Response

Содержание Promi-SD 205-OA





















































Результаты поиска

Содержание Promi-SD 205-OA

Отзывы:

Omron Promi-SD 205-OA, Руководство пользователя, Страница: 40 / 57

Результаты поиска

Содержание Promi-SD 205-OA

Отзывы: