Omron Promi-SD 205-OA Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 57

background image

Promi-SD 205-OA User Manual – 2. Configurations

15

Copyright © 2006 Sena Technologies, Inc. All rights reserved.

Upper 3 dip switches are used for setting baud rate. If the baud rate needs to be set out of the range given below,
PromiWIN or terminal program should be used for extended AT commands. At this time combination of dip switches

must be complied with AT cmd. Then baud rate will go back to 9600 as default.

2400

4800

9600

19.2K

38.4K

57.6K

115.2K

AT cmd

Baud
Rate

No use

No use

Hardware Flow Control
Handshaking

Pairing Button

Promi-SD205-OA provides Pairing Button for instant configuration without PC to make an automatic connection
between two Promi -SDs. For convenience sake, name two Promi-SDs as SD1 and SD2 respectively.

Turn off all the nearby Promi-SD

Turn on SD1 and SD2 and hardware reset both of them by pressing Reset Button.

Press the Pairing Button of SD1 for 2 seconds until Standby LED turns off and Connect LED blinks 3 times every 2 seconds.

Keep the power ON.

Press the Pairing Button of SD2 for 2 seconds until Standby LED turns off and Connect LED blinks 3 times every 2 seconds.

Now press again the Pairing Button for 2 seconds until Connect LED blinks every 0.5 second.

Wait for SD1 & SD2 to be connected for a while until Connect LED’s of SD1 and SD2 is lit in green. It takes about 10

seconds to make a connection. If there are many Bluetooth devices nearby, it will take a little bit more.

Turn SD1 off and on. Connect LED blinks twice in green every 3 seconds.

Turn SD2 off and on. Connect LED blinks once in green every 1 second.

Now a pair of Promi-SD is configured to make automatic connection, whenever power off and on.

Just use this pair of Promi-SD like virtual serial cable.

* Note: While pairing is progressing through the pairing buttons, the Command Response doesn’t operate

automatically. Then, the response messages such as OK, Connect, Disconnect and so on are not sent by Promi-SD.

Configuration Software

Configuration Software

Usage

Operating Platform

PromiWIN

Individual setup of Promi-SD

MS Windows 98SE or higher

PromiUpdater

Firmware Update

MS Windows 98SE or higher

This configuration software comes with the product, which also can be downloaded from http://www.sena.com

PromiWIN

«
...
15
16
17
18
19
...
»

Содержание Promi-SD 205-OA


























































Отзывы:

Нет отзывов

Похожие инструкции для Promi-SD 205-OA

Бренд: Icom Страницы: 2

Бренд: Zoom Страницы: 8

Бренд: Orion Страницы: 6

Бренд: GAI-Tronics Страницы: 4

Бренд: Hawg Wired Страницы: 10

Бренд: UFON Страницы: 2

Бренд: netsys Страницы: 25

XMDirect XMDPIO110

Бренд: TERK Technologies Страницы: 6

Бренд: Targus Страницы: 8

Бренд: Lindy Страницы: 8

Бренд: Belkin Страницы: 38

Бренд: Apex Digital Страницы: 2

MCS Serial IP Adapter

Бренд: Screen Research Страницы: 26

QVI-W204-Y12-M AI N-VO

Бренд: Car Solutions Страницы: 18

Бренд: Panasonic Страницы: 5

Бренд: Tuncmatik Страницы: 6

Бренд: Plantronics Страницы: 2

Бренд: Rolls Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды