BN
50
S / BN
75
S / BN
100
S / BN
150
S / BN
220
S / BN
300
S
79
8
2. Procedure for changing settings so that Xserve RAID performs auto startup when UPS starts up
(1) Open RAID Admin.
(2) Select the target Xserve RAID and log in to it.
(3) After login is complete, the Settings button on the RAID Admin screen is enabled. Click this button
to open the Settings screen. (A RAID Admin administrator password is required when changing
the settings. Enter the password when prompted.)
(4) After the Settings screen opens, click the System tab and
fi
nd the Options section. In the Options
section, place a check mark in the check box next to “Auto restart after power failure.”
(5) Click the OK button when
fi
nished.
3. Checking operation
(1) Remove the UPS AC input plug from the wall outlet (commercial power) to put it into Battery Mode.
(2) When in Battery Mode, the UPS outputs the power outage signal. When the Xserve RAID receives
the power outage signal, the write cache is closed.
(The write cache section on the operating system’s RAID Admin data screen displays “Not in
use.”)
(3) Power to the Xserve RAID can be turned OFF.
(4) After checking the operation, connect the UPS AC input plug to the wall outlet (commercial power).
