BN
50
S / BN
75
S / BN
100
S / BN
150
S / BN
220
S / BN
300
S
75
8
4. Contact Signal Connector (female DSUB9P)
●
Insert/ removal method of contact signal card
(1) Turn OFF the power switch, remove the two screws below the signal card expansion slot on the
back of the unit, and remove the cover.
(2) Carefully insert the contact signal card whose settings have been changed, and securely tighten
the 2 screws.
Pin assignment
Pin number
For jumper setting “SC07”
* Factory settings
For jumper setting “SC05/06”
5 4 3 2 1
9 8 7 6
1
Battery LOW signal output (BL)
NC
2
Trouble signal output (TR)
Backup signal output (BU)
3
Backup stop signal input (BS)
Backup reverse signal output
(BU)
4
NC
COMMON (COM)
5
COMMON (COM)
Battery Low Signal output
(BL)
Front view
Screw size: inch screw
#4-40
UNC
6
Remote ON/OFF input (-)
Backup stop signal input (BS)
7
Remote ON/OFF input (+)
Remote ON/OFF input (-)
8
Backup signal output (BU)
Trouble Signal output (TR)
9
Battery replacement signal output (WB)
Remote ON/OFF input (+)
xä-ÉÇx-
£ää-É£xä-
ÓÓä-ÉÎää-
xä-ÉÇx-
£ää-É£xä-
ÓÓä-ÉÎää-
