System Configuration in NS-Runtime
There are differences in the configuration between NS Projects and NS-Runtime.
In this section an overview of the configuration differences.
Project Properties
Overview of the differences between NS Projects and NS-Runtime.
Item
NS Project
NS-Runtime
Details
[Pop-up Menu] – [Show
Delimiter]
By checking it, you can
display a dividing line be-
tween the items in the
pop-up menu.
This item is grayed out,
so the delimiter line can-
not be displayed.
After conversion, it will
be converted to another
protocol.
Conversion with these
settings will generate an
error during the conver-
sion and the conversion
process will be aborted.
System Settings
Overview of the differences between NS Projects and NS-Runtime.
Item
NS Project
NS-Runtime
Details
[PT] – [Screen Saver]
It supports indirect speci-
fication the screen saver
startup time.
It doesn’t support indirect
specification. Only fixed
values can be set.
-
[PT] – [Device Monitor]
It supports the Device
Monitor function and you
can set whether to allow
or prohibit value changes
from the device monitor.
It doesn’t support the De-
vice Monitor.
Use CX-Programmer or
SwitchBox Utility as an
alternative to the Device
Monitor function.
[PT] – [Advanced Set-
ting]
It supports high speed
screen change mode.
It doesn’t support this
function.
[Initial] – [System Memo-
ry]
It supports NT compati-
ble System Memory.
It doesn’t support NT
compatible System
Memory.
-
[Initial] – [Option]
It supports [Initialize Sys-
tem Memory at startup]
function. By this function,
NS can keep the value
which is saved in the
PLC memory.
It doesn’t support [Initial-
ize System Memory at
startup] function. NS-
Runtime overwrites the
value which is saved in
the PLC memory.
-
[History] – [Save destina-
tion of history data]
It doesn’t support this
function. Destination is
fixed to CF memory card.
The fields for setting the
drive and path to save
the history data are valid.
-
[History] – [Save Cycle]
It doesn’t support this
function. When a NS
writes history data, it is
saved in non-volatile
memory.
It enables to set the re-
tention memory $ HB, $
HW and the interval for
saving historical data.
If unchecked, saving will
be executed at the end of
NS-Runtime.
[Video]
It supports Video relating
functions.
It doesn’t support Video
relating functions.
5 Conversion Procedures
5-11
NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)
5-2 Software Conversion
5
5-2-3
Modify the NS-Runtime Project
Содержание NY Series
