manualshive.com logo in svg

Omron NY Series, Руководство пользователя

Поделиться
Скачать
Omron NY Series Скачать руководство пользователя страница 70

Recent Windows 10 Operating Systems will automatically perform a Windows Update when
the Panel PC is connected to the internet. This will keep the Panel PC occupied for a longer
period of time, wait until it is completed and the Panel PC automatically reboots.

4

Login

5

Check and if necessary adjust the time and the timezone

6

Adjust the backlight, Logo LED, and Status LED brightness to your settings.

Additional Information

Verify that the Panel PC is responding to finger touches on the touchscreen of the product.

7

Install any third party software and drivers that may be required for your applications.

Precautions for Safe Use

Before operating the system, please make sure the appropriate software is installed and config-
ured. Doing so may prevent unexpected operation.

4-6-3

Auto Power ON

The Panel PC can be configured to start up when power is supplied to the power connector.
The 

Power Loss Control

 BIOS setting controls this behavior.

Set the Power Loss Control setting to 

Turn ON

 to activate the Auto Power ON function.

4 Installation

4-16

NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)

Содержание NY Series





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды